openSUSE 11.0: Round 2

Ok, ok... I decided to give openSUSE 11.0 another shot. Since my last blog post, I have read some reviews posted by some other people who encountered similar problems when attempting to actually use KDE4. Some of these people opted to install the KDE 3.5.9 remix after that and had more promising result. So, instead of letting my bias get the best of me, I am going to try openSUSE 11.0 one more time using KDE3. The following are the steps I took while going through this process:

1. Booted from DVD (openSUSE 11.0 x86_64)

2. Chose "Installation" from the boot menu

3. After the installer is completely loaded, I selected "English (US)" for both the language and the keyboard layout, read the license agreement, checked the "I Agree to the License Terms" box, and clicked Next.

4. I waited for a few seconds while the installer probed my hardware and updated some package lists, then I chose "New Installation" and clicked Next.

5. The next step was to choose my timezone. They have a very simple interface for this--much less frustrating than the counterpart in the most recent release of Ubuntu (8.04 LTS). My system clock is set to Mountain time, so I left that stuff alone and clicked Next.

6. This step is probably where I screwed up the most last time. It's where you choose which desktop environment you want. You can choose from GNOME 2.22, KDE 4.0, KDE 3.5, and XFCE Deskop. Last time I chose KDE 4.0. This time I chose KDE 3.5 and clicked Next.

7. After choosing the desktop environment, the installer took me to the disk partition section of the installation. This should be pretty easy for most people, but I changed a few things. Namely, I put the root and home partitions together, and I deleted one of my Windows partitions because Windows is stupid and bloated. Once I verified the disk partition settings, I clicked Next.

8. This part is where you get to enter the primary system user's information. You can specify the user's name, login, and password. You may also specify a few options including whether or not the root user will have the same password, whether that user will receive system mail, and whether or not that user will be logged in automatically. If you need to, you may change the authentication settings here too. I just entered the information and got on with it. (If you uncheck the box for the root user having the same password, you're prompted for the root password after this screen)

9. Finally, we get to the step where you get to verify all of the installation settings. I think I'll just go with the configuration for now. When you click Install, you're prompted to verify that you really want to install. Use your head on this one.

10. After all of that, it began to format my partitions. One neat thing that I noticed while it was installing was the fact that they rolled commonly-installed packages into what they call "images." This seems to increase installation speed considerably. In the past, I've had most RPM-based distribution installations take as long as (or longer than) Windows takes to install. Granted, the difference there is that you actually get useful stuff once Linux is installed, whereas with Windows, you're stuck with something barely usable and you still have to install drivers for every piece of hardware except your monitor.

    Anyway... the openSUSE folks seem to have addressed that problem recently (maybe just in this release). This went a LOT faster than I've ever seen (on any computer). Despite the use of those images, though, there were still nearly 500 packages that needed to be installed. It seems to be quite evident that the packages are working faster than ever before. It's refreshing (though it did still take quite a bit longer to install than most Debian-based distributions I've tried).

11. After all of the packages are installed, the system does some configuration and then reboots itself. When it comes back up, the installer will appear, do some more hardware detection and configuration, and then go straight into your desktop.

openSUSE actually didn't detect my 1680x1050 resolution (I didn't know any modern distribution wouldn't anymore), so I just went into YaST and set the resolution to what it should be. And then it locked up, and I had to do a hard reboot. Let's hope I can stop that from happening again. I suppose so long as I can still see things other than my mouse, I should be good.

Upon rebooting into my desktop, the resolution was still crappy. When I went to change it this time, though, I noticed that dual-head mode was enabled. That's stupid. I never plug a second monitor into my laptop. I disabled that, then tried to change the resolution. After logging out and back in, it seems to have changed the resolution properly. While I realize that I do have an extremely crappy video card, Ubuntu and others have been able to offer me 3D acceleration. This option is currently unavailable with openSUSE. Perhaps a little research will solve that problem.

After a few minutes of configuration and preference setting, my system locked up yet again. And another hard reset did the trick of getting it operational again. One more and it's outta here!! I do have to say... Minus the quirks with the resolution and drivers, the distribution does not seem bad at all. It might be worth trying out on a different computer--maybe I'd have better luck.

Alright, now I'm going to check the software management tool for a real driver for my video card. Looks like I may have found some. I hope they work. I'm using a "1-click installer" that I found from a Google search. The installation went fine, but after logging out and back in (to have the drivers take effect), it locked up again.

So, round two folks. Again, it might just be user error. It might just be my computer. Or openSUSE really might just suck. I don't think I'll be trying it on my computer again for a while. I might try on a different system altogether, but not on my main laptop.