Welp, I was getting somewhat bored with my computer, so I decided that I would reinstall SuSE today. I finally got my dual-layer 32-bit/64-bit SuSE 10.1 DVD, so now I don't need to switch CDs every few minutes. That will be nice. Anyway, this time I plan to document the quirks that I run into as I attempt to get my laptop back to the state it was in before all of this mumbo jumbo.

First off, I was able to install SuSE earlier today.. Everything seemed to be going well up until I should have logged in the first time. The login screen never came--it just showed the 'busy' cursor for a few minutes. Then I restarted the computer and it did the same thing. Then I decided to reinstall again... just because I could. The same thing happened, even though I chose the GNOME setup that time (whereas I chose to use KDE the first time). Eventually it dawned on me that the 3D acceleration drivers I used before required that I share some of my real RAM with my video card. I thought it might be a good idea to try disabling that business and seeing how things went on only the dedicated video RAM. It worked. I logged into a great-looking GNOME setup and played around for a bit. I noticed that my synaptics touch pad thinger (mouse) wasn't responding too well, and I'm not really a big fan of GNOME to begin with. So I'm in the process of reinstalling SuSE for the third time today--this time with KDE. We'll see how things go this time.

The installation has finished, and now I'm working on getting my wireless to function. I had previously acquired the appropriate 64-bit drivers, so those weren't hard to get back. I installed the ndiswrapper package that came with SuSE 10.1, extracted the drivers, and installed them. My laptop locked up the first time I tried to modprobe the ndiswrapper system, but it works ok now. I can see the wireless network here on campus but I can't do anything with it yet.

I suppose my time is up for now, but I will continue this post later.

One of my good friends recently purchased a super nice computer system which should last him quite some time. He and I go back a couple years, and we devised a plan as to how I would set up his supercomputer when he got it a year and a half or so ago. This past weekend we carried out our plans. Saturday morning I woke up early and took my road trip up to Montana to take care of business.

I arrived at my friend's house around 10AM and work immediately commenced. Before I get too far into the details of the weekend, let me share a few of the vital specs of his computer:

• Processor: AMD Athlon64 x2 4200+ (2.2Ghz) with liquid cooling
• System Memory: 2GB DDR
• Video: nVidia GeForce 7600 GS (512MB RAM)
• Hard Drive: 2x 160GB SATA-II (320GB total)
• Optical Media: 2x DVD+/-RW drives
• Network: Wireless RaLink 2500 series
• Monitor: 2x 19" Viewsonic LCD
• Speakers: 5.1 Creative Surround Sound

Yeah, it's pretty sweet. I thoroughly enjoyed being able to work on it. I'll have to post some pictures of my friend's computer sometime. Ok, now on to the details of setting up his system.

My friend wanted to have both Windows and Linux on his system. We spent quite a bit of time around each other. Being the Linux nut that I am, he heard so much about Linux and wanted to get his fix. But he also wanted Windows for games and whatnot. Understandable. So we began the day trying to install Windows XP SP2 on his box. That was thoroughly painful, as usual. Installing a single driver, rebooting, installing another driver, rebooting, installing yet another driver, and once again rebooting. You'd think that the actual installation of Windows XP on a system such as his would be quite speedy. No, no... Microsoft never ceases to amaze me with the speed of Windows--or the lack thereof. It took at least an hour to get through all of the initial booting, setting up the partitions in a fashion that Windows could handle, installing drivers, and finally minimal essential software. Very rediculous. One of the best parts was that Windows somehow installed itself on the second hard drive...because of this (or some other unknown cause) Windows could not boot itself up. We had to use another bootCD in order to boot Windows. I assumed that GRUB (a Linux bootloader) would be able to circumvent this problem.

Once the first installation of Windows was complete and we had a backup of the installation, we proceeded to install SuSE 10.1 x86_64. This installation was painless. Everything worked extremely well. The hardest part about getting Linux to function properly was figuring out why his wireless adapter wouldn't connect to his router. It took a bit of time, but eventually we found the solution online (this solution also applied to my laptop, so I have great wireless in Linux now). As I was getting certain multimedia applications installed on Linux (since they're not included with SuSE for copyright reasons), we watched Hitch on the second monitor. It was great. Eventually Linux appeared to be set up and running perfectly. That was about the time we reboot Linux for the second time (once during installation, if I remember correctly).

Come to find out that not even GRUB could boot Windows. We were greatly frustrated, and my friend began to understand slightly more why I like Linux more than Windows. We decided to swap the hard drives around so that the drive with Windows already on it would be the primary master. I warned him that it would mean reinstalling Windows because it wouldn't know where to find itself after swapping the drives around. He was down with that, so that's what we did. We ran through the whole bloody process again. At least this time we knew what to expect when Windows complained about drivers--we'd already experienced it only hours before.

This installation of Windows went a bit more smoothly, but it also meant that we'd have to do something to get Linux back to an operational stage (firstly, get the GRUB boot menu back). I believe it was the first time I rebooted the computer after the second Windows installation that we got a "NTLDR is missing" error. Blasted Windows. I solved that problem, but then it started complaining about an invalid boot.ini file. Rubbish.

All we needed to do for Linux was pop the first install CD back in and run a rescue utility. It examined the existing installation and modified configuration files according to the drive swap. Linux was back up and running within 5 or 10 minutes. Windows, on the other hand, continues to complain at boot about the invalid boot.ini file.

And once again, my contempt for Windows has been reaffirmed. The only reasons I keep Windows around is for Adobe Creative Suite 2 and a game here or there. Even Google Earth runs natively on Linux (as of yesterday).

I've been using SuSE Linux 10.1 on my laptop ever since the day it was released, and I have to say that I'm quite satisfied with it. I'm usually a Slackware man, myself, but SuSE has become one of my new favorites.

Ever since I first started using Linux some 7 years ago, I've kept an eye on SuSE. I came really close to actually purchasing a boxed copy back around version 7.3 I think. This was mostly because SuSE is so visually appealing. Once openSuSE came about, I was super excited and downloaded the 5 CD set for version 10.0 immediately. To my disappointment, this version didn't play well with my brand new laptop. I didn't feel like finding out why, so I just gently tucked the CDs away in the drawer with all of my other Linux CDs. As soon as the 10.1 CD set was publicly released on May 11th, I grabbed a torrent to get all of the 5 CDs plus the non-OSS add-on CD.

The same day, I popped the first CD in and began the installation. To my surprise, SuSE 10.1 had no qualms with my Radeon 200M, whereas almost all distros that I had tried on this laptop up to this point would lockup once they did anything outside of the wonderful console (besides Fedora Core 5). SuSE 10.1 was 1 up on all the others, especially after seeing the splash screen. Absolutely beautiful. The installation went really smoothly. I opted for the KDE install, as I'm not a big fan of GNOME. And this is despite the fact that the folks at SuSE spent a lot of time and effort making GNOME mesh well with their distro.

Once the installation finished, I began tinkering around in my menus just to see what there was to see. I have to say that things are set up pretty intuitively in KDE to begin with (or maybe I've just been using it for a long time), but SuSE makes it even better. Device recognition is actually beyond my expectations for Linux. Just about anything I pop into a USB port will be recognized within seconds and I will be asked what I want to do with it. Even my HP All-In-One printer/scanner/copier works without a hitch!! This is the first scanner that I've had function in Linux! Excellent. My media reader doesn't seem to be compatible with Linux yet, but that's fine since I rarely use it anyway. I was able to get my Radeon to play well with the proprietary drivers from ATI, and my FPS jumped from around 100 to 1100 when running glxgears. Nice improvement.

One thing that did take a long time to figure out was my wireless. I had only played with wireless one other time in Linux and that was on some generic PCMCIA wireless card in a past roommate's laptop. That seemed to be simple enough to setup, with the help ndiswrapper. However, finding the correct drivers for my internal wireless adapter, and finding them in the 64-bit edition proved to be quite the runaround. Eventually, I was able to get in touch with someone who graciously emailed them to me as an attachment. To my disappointment, however, ndiswrapper didn't seem to do wireless with these drivers either!! Wow. I put wireless tinkering away for a while, but came back to it amidst my boredom. I came across some forum that had the answer to my quest: a file link. The drivers I had received through email were the correct drivers, only they were linked up to some other device identifier. All I needed to do was essentially make an alias of my device identifier and make it point to the identifier used by the drivers. As soon as I did this, ndiswrapper worked like a charm. I was able to see several wireless networks in my area. I did (and still do) have a problem connecting to certain access points, however. For some strange reason, I cannot figure out how to connect to my own wireless router, nor the university wireless. It's rather frustrating, but I can live with an ethernet cable.

Ahh, yes. Linux.